| AMI UCHPL206-20CEB Hanger Unit Bearings | Calculation factor f0:13.1; Limiting speed:32000 r/min; Calculation factor kr:0.025; D1 ≈:28.95 mm; Basic dynamic load rating C:8.06 kN; Basic static load rating C0:3.75 kN; Da max.:30.8 mm; Mass bearing:0.045 kg; B:11 mm; D:35 mm; |
| AMI UCFCF207 Flange Block Bearings | Basic dynamic load rating C:25.5 kN; D:62 mm; Reference speed:8500 r/min; r1,2 min.:0.3 mm; Basic static load rating C0:60 kN; Fw:50 mm; Fatigue load limit Pu:7.2 kN; Limiting speed:9500 r/min; Db:50.6 mm; Mass bearing:0.14 kg; |
| AMI SUE206-18FS Insert Bearings Cylindrical OD | Fillet Radius ra:2.00 mm; d:160.000 mm; B:38.00 mm; Accessories:Two Seals & Snap-Rin; Oil Speed Rating Open/Shielded n2:3000 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; D:240.0000 mm; Sealed Speed Rating n3:1600 rpm; Basic Static Radial Load Rating Co:143000 N; Basic Dynamic Radial Load Rating C:143000 N; |
| AMI UCPPL204-12MZ2CW Pillow Block Bearings | N1:28.575 mm; J max.:463.55 mm; Cap bolt recommended tightening torque:813.5 N·m; A1:158.75 mm; PG:1/4 NPT; Ca:82.804 mm; L:539.75 mm; R1:95.25 mm; P150°:136 kN; Stabilizing ring:SR-30-0; |
| AMI UKFT210+HA2310 Flange Block Bearings | G1:63 mm; d:630 mm; Mass withdrawal sleeve:188 kg; B1:475 mm; Hydraulic nut:HMV 134 E; A:11 mm; d1:600 mm; B2:489 mm; G:Tr 670x6; Nut for removal:HM 31/670; |
| AMI BLCTE206-18 Flange Block Bearings | Basic static load rating C0:18 kN; Limiting speed:22000 r/min; Fatigue load limit Pu:2.16 kN; Basic dynamic load rating C:13.8 kN; Mass needle roller and cage assembly:0.012 kg; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 20x26x4; U:13 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 20x26x4; Ew:26 mm; Reference speed:19000 r/min; |
| AMI UCHPL204-12CEB Hanger Unit Bearings | P60°:175 kN; da:101.6 mm; H2:44.45 mm; Da:180 mm; A2:155.575 mm; P150°:58.7 kN; H1:114.3 mm; RG:3/8 NPT; A1:111.125 mm; H:222.25 mm; |
| AMI UCLP208-24C4HR23 Pillow Block Bearings | A:6 mm; d3:670 mm; d:530 mm; B:80 mm; d1:500 mm; Mass adapter sleeve assembly:192 kg; Lock nut:HM 31/530; Hydraulic nut:HMV 106E; Locking device:MS 31/530; B5:105 mm; |
| AMI MUCHPL206-20B Hanger Unit Bearings | with tapered bore:1201 ; D:32 mm; Oil:24 000 min-1; d:12 mm; B1:mm; B:10 mm; Pu:1.260 kN; rs Dynamic (Cr):0.6 mm; with cylindrical bore:28 000 min-1; Static (Cor):5.590 kN; |
| AMI KHLP209-26 Pillow Block Bearings | S:4.763 mm; Bearing:23220 CCK/W33; End plug (suffix Y):EPR 12; A2:222.25 mm; Cap bolt, SAE grade:8; Adapter sleeve assembly:SNW 120x3.3/8; P150°:40 kN; L:387.35 mm; Housing:SAW 520; Initial grease fill:181.44 g; |
| AMI UCFCS207-23 Flange Block Bearings | Threads per inch:12; Lock nut:AN 24; Sleeve:S 124x4; B1:117.805 mm; G:119.786 mm; Hydraulic nut:HMVC 24E; d3 max.:155.702 mm; Lock washer:W 24; B4:23.825 mm; B:20.904 mm; |
| AMI UKX09+H2309 Insert Bearings Spherical OD | rs (min):1 mm; C:13 mm; r1s (min):1 mm; Static (Coa):33.5 kN; B:15 mm; T:16.25 mm; Pu:4.090 kN; d2:25 mm; D:52 mm; Dynamic (Ca):29.9 kN; |