| AMI UC206-19MZ20 Mounted Units & Inserts | Housing:SAF 026 KA; A1:120.65 mm; J max.:368.3 mm; PG:1/4 NPT; P60°:149 kN; P150°:50.7 kN; h:42.862 mm; Initial grease fill:232.47 g; Bearing:23026 CCK/W33; P180°:60.9 kN; |
| AMI UCFCF206-19 Flange Block Bearings | Pu:2200 kN; with cylindrical bore:500 min-1; B:150 mm; with tapered bore:630 min-1; d:220 mm; D:370 mm; rs (min):4 mm; Dynamic (Cr):6 mm; Grease:3690 kN; Oil:325.290 kN; |
| AMI UC211-32 Insert Bearings Spherical OD | Housing:SY 509 M/VZ033; A5:23 mm; Recommended diameter for attachment bolts, inch G:0.5 in; L:187 mm; d:45 mm; J7:17 mm; H:107 mm; Fatigue load limit Pu:0.915 kN; N1:14 mm; End cover:ECY 209; |
| AMI UCTBL209-26B Mounted Units & Inserts | Basic static load rating C0:224 kN; C1 max.:28 mm; r1 min.:0.6 mm; G:M 42x3; l5 ≈:30 mm; d:45 mm; α:7 °; w:55 mm; Basic dynamic load rating C:127 kN; B:32 mm; |
| AMI UKX09+H2309 Insert Bearings Spherical OD | rs (min):1 mm; C:13 mm; r1s (min):1 mm; Static (Coa):33.5 kN; B:15 mm; T:16.25 mm; Pu:4.090 kN; d2:25 mm; D:52 mm; Dynamic (Ca):29.9 kN; |
| AMI BLCTE206-18 Flange Block Bearings | Basic static load rating C0:18 kN; Limiting speed:22000 r/min; Fatigue load limit Pu:2.16 kN; Basic dynamic load rating C:13.8 kN; Mass needle roller and cage assembly:0.012 kg; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 20x26x4; U:13 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 20x26x4; Ew:26 mm; Reference speed:19000 r/min; |
| AMI KHR211-34 Insert Bearings Cylindrical OD | D:60 mm; Eb:59 mm; Fatigue load limit Pu:18.3 kN; Ea:33 mm; Roller and cage thrust assembly:K 89306 TN; Limiting speed:5300 r/min; Mass roller and cage thrust assembly:0.04 kg; Shaft washer:WS 89306; Reference speed:2600 r/min; d:30 mm; |
| AMI UCP212C4HR23 Pillow Block Bearings | J2:17 mm; B:32 mm; Associated spanner (Hook spanner in accordance with DIN 1810):B 230-245; Grub (set) / Locking screw size:M 10; J1:224 mm; G:M 190x3; Axial static load carrying capacity:1280 kN; Recommended tightening torque:35 N·m; d3:240 mm; N2:10 mm; |
| AMI UCHPL204-12MZ2CEW Hanger Unit Bearings | Accessories:Shield & Seal; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3800 rpm; d:55.000 mm; Basic Dynamic Radial Load Rating C:119000 N; B:52.40 mm; Oil Speed Rating n2:5000 rpm; D:120.0000 mm; Basic Static Radial Load Rating Co:122000 N; |
| AMI UEWTPL206CEW Mounted Units & Inserts | D:72.0000 mm; Width - Outer Ring B0:19.0 mm; Fillet Radius ra:1.00 mm; Speed Rating-Open and Shielded-Grease OSG:9000 rpm; Basic Radial Load Rating-Dynamic DC:29600 N; Width - Inner Ring B1:30.16 mm; Diameter E:43.1 mm; Basic Radial Load Rating-Static SCO:16600 N; d:30.000 mm; Accessories:300SWI Non-Filling N; |
| AMI UC213-40 Insert Bearings Spherical OD | d:55 ; da:62 min; B:33.3 mm; Dynamic (Cr):74.481 kN; a:64 mm; Weight:1.05 kg; Bearing designation:3211 ; Da:91 max; ra:1.5 max; |
| AMI UENFL208-24CB Mounted Units & Inserts | D:100 mm; Grease:5 300 min-1; r1s (min):1 mm; B:21 mm; Pu:1.839 kN; d:55 mm; Dynamic (Cr):58.101 kN; Oil:6 300 min-1; Static (Cor):40.460 kN; a:29.5 mm; |